1964-1972 GM A Body ( Chevelle, GTO, Cutlass) Front Disc Brake Kit includes:
Stock Height spindles Front Vented 11" rotors 5"x4.75" w/ 7/16" studs Dust caps Inner & outer bearings, seals, & mounting hardware Front caliper brackets Backing Plates Front rubber brake hoses Large GM single piston calipers pre-loaded with pads Must use 15" or larger rims.
Complete Rear Disc Brake Conversion Kit Includes:
Rear 11" Vented GM Rotors Multi Pattern Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs Large GM Large Bore Single Piston Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado) D54 Pads Included Caliper Brackets & Spacers Bracket Hardware Rubber Brake Hoses Hoses & Clips Emergency Brake Cables
Does not fit S-10 Chasis or truck frames Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer 2.786" max register axle Does not Fit 14" Rims Must use 15" or larger When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed.
9" Single Zinc Power Brake Booster Conversion Kit (Disc/ Disc)
9" Single Zinc Power Brake Booster Cast Iron Master Cylinder Disc/ Disc Brass Proportioning Valve Left Mount Proportioning Valve Kit (2) 3/8"-24 For Front Brakes & (1) 9/16"-18 For Rear Brakes Valve bracket, lines, & brake light warning switch, mounting hardware Angle firewall brackets Clevis.
SHIPPING NOTE: Addition oversize surcharge may apply.
Our SKU # for this part is
*This part's shipping is subject to a custom shipping arrangement. You will be contacted with the exact shipping quote within 48 hours.
This part will fit the following years:
1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972