1964-1972 GM A Body ( Chevelle, GTO, Cutlass) Front Disc Brake Kit includes:
Stock Height spindles Front Vented Drilled & Slotted 11" rotors 5"x4.75" w/ 7/16" studs Dust caps Inner & outer bearings, seals, & mounting hardware Front caliper brackets Backing Plates Front rubber brake hoses Large GM single piston calipers pre-loaded with pads Must use 15" or larger rims.
Complete Rear Disc Brake Conversion Kit Includes:
Rear 11" Vented Drilled & Slotted GM Rotors Multi Pattern Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs Large GM Large Bore Single Piston Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado) D54 Pads Included Caliper Brackets & Spacers Bracket Hardware Stainless Steel Brake Hoses Hoses & Clips Emergency Brake Cables
Does not fit S-10 Chasis or truck frames Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer 2.786" max register axle Does not Fit 14" Rims Must use 15" or larger When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed.
11" Single Delco Moraine O.E.M. Stamped Power Brake Booster Conversion Kit (Disc/ Disc)
9" Delco Moraine Stamped Zinc Power Brake Booster O.E.M. Firewall Brackets Riveted on Not Bolt On 1-1/8" Bore; Deep Hole Cast Iron Master Cylinder 9/16" & 1/2" Ports on Left Side with Bleeder Valves Exact Copy of Original w/ casting number 5468309 Left Mount Proportioning Valve Kit (2) 3/8"-24 For Front Brakes & (1) 9/16"-18 For Rear Brakes Brass Proportioning Valve for Disc/Disc Brakes Mounting Bracket Bake Light warning switch.
SHIPPING NOTE: Addition oversize surcharge may apply.
Our SKU # for this part is
*This part's shipping is subject to a custom shipping arrangement. You will be contacted with the exact shipping quote within 48 hours.
This part will fit the following years:
1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972